Skip to main content

Topic: X900 Tricopter - moj prvi Tricopter (Read 20388 times) previous topic - next topic

0 Members and 2 Guests are viewing this topic.

X900 Tricopter - moj prvi Tricopter

Hobbyking X900 Tricopter Glass Fiber Multi-Rotor Frame

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=28496&aff=448825

Da zapocnem novu temu, dugo sam planirao jednog tricoptera ali nije bio veliki izbor frejmova i repni mehanizam nije bas jednostavan.
Talon mi se svidjao ali je bio mali i dosta skup, nedavno je HK izbacio jedan prihvatljive cijene i odlucio sam i to isprobati.

HK info

Designed from the ground-up by our own engineering team, the X900 Tricopter is a culmination of months of design, testing and material sourcing to provide you with the perfect mix of quality, performance and value. The X900 Tricopter frame is a Hobbyking exclusive meaning you won't find it anywhere else!

The X900 features a very nicely finished glass fiber main frame, shock-absorbing landing legs and folding aluminum arms. The shock-absorbing landing legs are a great feature to handle those rough landings that we all have from time to time.

The integrated tail servo mount is constructed of glass fiber as well, allowing you to mount your favorite micro/mini tail servo for yaw control. The rear motor mount pivots on a dual ball bearing supported shaft providing super smooth and precise movement. As a result, the yaw control is locked-in and very precise while flying.
 
We offer a full line of multi-rotor electronics such as multi-rotor control board, ESC, motors and more, so it has never been easier or more affordable to get your multi-rotor frame in the air!
 
All necessary hardware is included. Simply add your own electronics.

Specs:
Front Arm Lengths: 420mm (boom base to motor shaft center)
Rear Arm Length: 450mm (boom base to motor shaft center)
Motor Bolt Holes: 16/19/25mm
Frame Weight: 385g (w/out electronics)
 
Required:
28-XX or 35-XX brushless outrunner motor x 3
25~40A brushless ESC x 3
High speed micro/mini servo for the tail (digital servo recommended)
10~12 inch propeller (2 standard/1 reverse rotation)
Multi-rotor control board
2650~3300mAh 11.1V lipoly
4CH Transmitter & Receiver




Odg: X900 Tricopter

Reply #1
X666 je bio zrtvovan za dijelove


Odg: X900 Tricopter

Reply #2
Kabl za struju za tricopter mi je napravio 4tm i ovim putem mu se posebno zahvaljujem.




Odg: X900 Tricopter

Reply #3
Servo za rep

TGY-306G Ultra Fast/High Torque MG Digital Alloy Cased Servo 3kg / .06sec / 21g
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=22687&aff=448825

TGY-306G Ultra Fast/High Torque MG Digital Alloy Cased Servo  3kg / .06sec / 21g - Excellent 450 Heli & 3D servo.
Model: TGY-306G
Operating Voltage: 4.8V / 6.0V
Operating Speed: 0.07sec.60º/ 0.06sec.60º
Stall Torque: 2.4kg.cm /3.0kg.cm
Size: 23X12.1X25.8mm
Weight: 21g
Motor: 12mm Coreless
Potentiometer: indirect Drive
Ball bearing: Top Ball Bearing
Gear: Metal
Case: Aluminum
Connector wire: 220mm
Plug: JR/Universal



Odg: X900 Tricopter

Reply #4
Sta se dobije u kutiji


Odg: X900 Tricopter

Reply #5
Naravno gore ide KK2


Odg: X900 Tricopter

Reply #6
Slikice sastavljanja


Odg: X900 Tricopter

Reply #7
spajanje prijemnika


Odg: X900 Tricopter

Reply #8
spoj na plocicu iz bliza


Odg: X900 Tricopter

Reply #9
spajanje i testiranje repa



Odg: X900 Tricopter

Reply #11
Sastavljen


Odg: X900 Tricopter

Reply #12
vaganje

825 g

plus 1 2200 3s 1005g
na kraju ce ici jos jedna baterija i mozda ponekad gopro


Odg: X900 Tricopter

Reply #14
Pilot

kasnije idu gore loptice i led