Topic: Gyro servo (Read 1664 times) previous topic - next topic

Ne znam da li je bila tema, ako je brišem...

[attach=1]


GS-1 Features:

    Same size as standard size R/C servos
    170 degree motion based on standard 1ms ~ 2ms PWM control
    Ball bearing on output shaft
    Futaba output spline
    Nylon gears for smooth operation
    4.8V to 6.0V operation
    50 oz-in torque at 4.8V
    37 grams (1.3 oz) weight
    MEMS gyro to compensate for servo movement
    Microprocessor control
    Automatic gyro drift cancellation
    Slow slewing on power-up to desired position
    Can be used with a servo controller or R/C receiver or can be used with only a battery for stabilizing a fixed position

http://vimeo.com/4767293#at=0

http://www.dunehaven.com/gs1.htm

 

Zanimljiva stvarcica... doduse nije jeftin ali ovo je korak naprid i svakako pohvalan... za aero fotografiju super

Pa koliko sam vidio kosta oko 70 dolara nije puno samo neznam koliki je shiping za to?

Shipping je 15 USD

Hmm recimo da ti za AP platformu trebaju 3 komada... treba vidjeti koliko dobro rade i dal optavdavaju cijenu...
Dal je brzina dobra... rezolucija...

mene rezolucija brine samo  ovako rade ok