FlyFreak

RC Modeli => Elektronika i baterije => Topic started by: kbelcar on January 29, 2015, 01:04:14 pm

Title: OrangeRX Open LRS 433MHz Tx/Rx programiranje
Post by: kbelcar on January 29, 2015, 01:04:14 pm
Kupio sam ovaj sustav (koji vjerojatno vec ima neki FW na sebi) jer sustav radi (vec je bindan dosao - sto mi isto jako cudno), ali nemam pojma sto je na njemu - a vjerujem da se iz ovog sustava moze puno vise dobiti sa nekim FW modifikacijama

E, sad bih zelio sam programirati tx i rx preko aplikacije "openLRSng" Chrome ili preko "arduina", sto mi naravno ne polazi za rukom u Arduino poruka (avrdude:stk500():not in sync: resp=0x00)

a u aplikaciji  "openLRSng"
"12:50:00 -- Serial port successfully opened with ID: 2912:50:11 -- Start message not received within 10 seconds, disconnecting
12:50:11 -- Serial port successfully closed"

Sad u cemu krivo radim - ne znam, dal fali bootloader!!!!
Ima li koga tko je uspio u tome?!

zahvaljujem
Title: Odg: OrangeRX Open LRS 433MHz Tx/Rx programiranje
Post by: backspin on January 29, 2015, 01:40:39 pm
nisam se nikad bavio time niti posjedujem isti, ali mozda ti ovo pomogne:
https://github.com/openLRSng/openLRSng/wiki/Connecting-to-a-computer

povuci cu paralelu s naze32 gdje mi se u baseflight-u (config toolu) javljala full slicna greska i nisam kuzio u cem je stos.... ubiti sam samo trebao instalirat odgovarajuce drivere..
Title: Odg: OrangeRX Open LRS 433MHz Tx/Rx programiranje
Post by: ficho on January 29, 2015, 01:44:16 pm
Si spojio DTR pin na serialu?
Meni je prijemnik dosao bez bootloadera, zaprzio ga s ispom.
Title: Odg: OrangeRX Open LRS 433MHz Tx/Rx programiranje
Post by: kbelcar on January 29, 2015, 01:57:22 pm
>Evo kako sam spojio (probao sam tx-tx/tx-rx i rx-rx/rx-tx kombinacije) sa ovim TTL modulom (modul je od remzibi osd-a)

imam i ovaj http://www.hobbyking.com/hobbyking/store/__38395__OrangeRX_USB_Firmware_Update_Kit_for_JR_Futaba_Style_Transmitter_Module.html (http://www.hobbyking.com/hobbyking/store/__38395__OrangeRX_USB_Firmware_Update_Kit_for_JR_Futaba_Style_Transmitter_Module.html)

a njega ne znam kako spojiti koji pin ide na koji pin


[attachimg=1]

[attachimg=2]
Title: Odg: OrangeRX Open LRS 433MHz Tx/Rx programiranje
Post by: ficho on January 30, 2015, 06:12:17 pm
Trebas adapter koji ima dtr pin za flashanje openlrsa (kao i za svaki arduino), detalji: https://github.com/openLRSng/openLRSng/wiki/Connecting-to-a-computer (https://github.com/openLRSng/openLRSng/wiki/Connecting-to-a-computer)
ja sam koristio ovaj: http://rctimer.com/product-684.html, (http://rctimer.com/product-684.html,) s jumperom prelemljenim na 3.3v naravno :)


Naze32 nije arduino, njemu to netreba :)


Title: Odg: OrangeRX Open LRS 433MHz Tx/Rx programiranje
Post by: kbelcar on January 31, 2015, 03:21:25 pm
Hvala.... da u pravu si

Evo narucio sam ovaj - nadam se da je to to!?

http://www.ebay.com/itm/381101592840?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT (http://www.ebay.com/itm/381101592840?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
Title: Odg: OrangeRX Open LRS 433MHz Tx/Rx programiranje
Post by: miso227 on January 31, 2015, 03:56:32 pm
ja bi sebi uzeo 433mhz set, dali netko zna koliki je domet ovog orange?